SDLG Compact Equipment Attachments in Kenya: B877F, TV1100H and STR1000H
Watch — 67 seconds: the complete SDLG range in Kenya
The compact family these attachments serve — every SDLG machine in one film from the Ruai yard.
Video not playing? Download it or watch on YouTube — and for a machine of your own, call +254 718 686 967.
One machine buys the iron; the attachment rack buys the work. This SDLG compact equipment attachments Kenya guide is the single compatibility matrix for the three compact platforms — the B877F backhoe loader, the TV1100H compact track loader and the STR1000H mini track loader — with couplers, hydraulics, weight classes and application notes in one place, and every unverified number kept out of the table by policy.
Quick answers if you are building a rack: the B877F runs buckets, breakers and augers on its dig end; the TV1100H runs the wide quick-attach tool family on its vertical-lift carrier; the STR1000H runs the lightest tools of the three. Exact SDLG attachment compatibility — mount, flow, pressure and weight — is confirmed per tool against the official datasheet at quotation, and the registered capacity conflicts on both track loaders keep every load figure off this page. Model context: the TV1100H high-flow attachment guide, the STR1000H hydraulics guide, and the desk at +254 718 686 967 for the matrix in writing.
| The three platforms | B877F backhoe loader · TV1100H compact track loader · STR1000H mini track loader |
| The matrix columns | Mount and coupler · hydraulic provision · weight class · application fit · availability status |
| The honesty rule | No load-capacity figures for either track loader — registered conflicts stay gated to the datasheet; nothing in the matrix is averaged or guessed |
| Status marks | Standard = quoted with the machine · Order-only = factory lead time · Verify = datasheet check before quotation |
| Verification date | 2026-11-03 |
The compatibility matrix
| Attachment | B877F (dig end) | TV1100H (quick-attach) | STR1000H (quick-attach) |
|---|---|---|---|
| General-purpose buckets | Standard — loader and dig ends, per bucket set | Standard — verify width and edge | Standard — light class |
| Trenching buckets | Standard — dig end, per trench width | Order-only trencher attachment — verify flow | Verify — light trenching only |
| Hydraulic breakers | Standard — dig end mounting per manual | Standard — matched weight class per datasheet | Order-only — smallest class, verify |
| Augers | Standard — dig end drive | Standard — torque class per datasheet | Verify — light post and fence work |
| Pallet forks | Order-only — loader-end carriage | Standard — vertical-lift carry | Standard — light pallet work |
| Grapples and brooms | Verify — application-specific | Standard — grapple and sweeper family | Verify — light cleanup class |
| 4-in-1 combination buckets | Not applicable to dig end | Order-only — verify coupler and hydraulics | Verify — likely order-only |
The B877F rack: digging-led versatility
The B877F attachments story — the SDLG backhoe attachments family — is the dig end: buckets in the widths the trench schedule demands, breakers matched per the manual, augers for the fence-and-pole work that fills a utility contractor's quiet weeks. The loader end adds forks and light grapples where the yard work justifies them. The utility application context is worked in the B877F municipal-work guide, and the machine-choice context in the backhoe-versus-track-loader selection guide — the rack and the machine are chosen together, never separately.
The track-loader racks: flow decides the family
For compact track loader attachments Kenya buyers, the rack splits by hydraulic provision. The TV1100H's high-flow configuration carries the powered-tool family — augers, trenchers, sweepers and their siblings — with each tool's flow and pressure confirmed per the datasheet gate; the sibling comparison works which rack fits which site. The STR1000H's auxiliary circuit serves the lightest tools in the family — the orchard, estate and tight-access work its guide describes. Both machines' rated-capacity figures stay gated: the TV1100H attachments and STR1000H attachments conversations quote verified configurations only, and any tool that would push a load-chart limit is refused at the desk, not fitted at the site.
Five checks before the rack is quoted
- The tool list from the diary: the year's actual attachment work — the rack sized to the diary, not the catalogue.
- The matrix status marks: Standard, Order-only and Verify assigned per tool before the quotation conversation.
- The datasheet gate: flow, pressure, weight and mount verified per tool per unit — no figure from memory.
- The conflict discipline: no load claims for either track loader until the register clears; the rack is chosen by task, not by capacity rumour.
- The single quotation: machine, rack and delivery itemised together — within 24 hours, dated, authoritative.
Working the rack with the desk
When the buy SDLG attachments Kenya conversation matures, the matrix travels with it: the desk converts each row into a quoted line — tool, configuration, status — and the handover covers the quick coupler compact equipment checks that keep changeovers safe: carrier-off, tool seated, locks engaged, hydraulics connected clean. These are the SDLG hydraulic attachments Kenya fleets actually run — sized from the diary, gated by the datasheet, and quoted once, in writing.
Frequently asked questions
1. What attachments fit the SDLG B877F?
Buckets, breakers and augers on the dig end, with forks and light grapples on the loader end — each row of the matrix confirmed per the official datasheet at quotation.
2. What attachments fit the TV1100H?
The wide quick-attach family — buckets, forks, grapples, augers, trenchers and sweepers on the high-flow configuration, with flow, pressure and weight verified per tool.
3. What attachments fit the STR1000H?
The lightest tools of the family on its auxiliary circuit — light buckets, forks, augers and cleanup attachments, each verified against the datasheet gate.
4. Why are there no capacity figures in the matrix?
Both track loaders carry registered capacity conflicts in our sources; the campaign publishes no figure until the official datasheet gate clears — the matrix works by task, not by contested numbers.
5. What do the status marks mean?
Standard ships with the machine; Order-only adds the factory lead time; Verify means the datasheet check comes before quotation.
6. How do I confirm hydraulic compatibility?
Per tool, per unit: flow, pressure and coupling confirmed against the official datasheet — quoted in writing, never assumed.
7. Can I finance attachments with the machine?
Often yes — the attachments-and-parts financing guide works the lender route; the desk confirms what the file supports.
8. Who builds the rack with me?
The SDLG desk at +254 718 686 967 — tool list reviewed, matrix quoted in writing within 24 hours.
Build your attachment rack with the SDLG desk
Send your tool list — we verify every row against the datasheet, mark the status and price the rack in writing within 24 hours.
Disclaimer: Attachment compatibility — mount, flow, pressure and weight — is verified per tool and per unit against the official configuration datasheet; the matrix is a planning tool, not a specification. Registered capacity conflicts on the TV1100H and STR1000H keep all load figures gated; no such figure is published here. Figures verified 2026-11-03.
SDLG Compact Equipment Attachments in Kenya: B877F, TV1100H and STR1000H
Watch — 67 seconds: the complete SDLG range in Kenya
The compact family these attachments serve — every SDLG machine in one film from the Ruai yard.
Video not playing? Download it or watch on YouTube — and for a machine of your own, call +254 718 686 967.
One machine buys the iron; the attachment rack buys the work. This SDLG compact equipment attachments Kenya guide is the single compatibility matrix for the three compact platforms — the B877F backhoe loader, the TV1100H compact track loader and the STR1000H mini track loader — with couplers, hydraulics, weight classes and application notes in one place, and every unverified number kept out of the table by policy.
Quick answers if you are building a rack: the B877F runs buckets, breakers and augers on its dig end; the TV1100H runs the wide quick-attach tool family on its vertical-lift carrier; the STR1000H runs the lightest tools of the three. Exact SDLG attachment compatibility — mount, flow, pressure and weight — is confirmed per tool against the official datasheet at quotation, and the registered capacity conflicts on both track loaders keep every load figure off this page. Model context: the TV1100H high-flow attachment guide, the STR1000H hydraulics guide, and the desk at +254 718 686 967 for the matrix in writing.
| The three platforms | B877F backhoe loader · TV1100H compact track loader · STR1000H mini track loader |
| The matrix columns | Mount and coupler · hydraulic provision · weight class · application fit · availability status |
| The honesty rule | No load-capacity figures for either track loader — registered conflicts stay gated to the datasheet; nothing in the matrix is averaged or guessed |
| Status marks | Standard = quoted with the machine · Order-only = factory lead time · Verify = datasheet check before quotation |
| Verification date | 2026-11-03 |
The compatibility matrix
| Attachment | B877F (dig end) | TV1100H (quick-attach) | STR1000H (quick-attach) |
|---|---|---|---|
| General-purpose buckets | Standard — loader and dig ends, per bucket set | Standard — verify width and edge | Standard — light class |
| Trenching buckets | Standard — dig end, per trench width | Order-only trencher attachment — verify flow | Verify — light trenching only |
| Hydraulic breakers | Standard — dig end mounting per manual | Standard — matched weight class per datasheet | Order-only — smallest class, verify |
| Augers | Standard — dig end drive | Standard — torque class per datasheet | Verify — light post and fence work |
| Pallet forks | Order-only — loader-end carriage | Standard — vertical-lift carry | Standard — light pallet work |
| Grapples and brooms | Verify — application-specific | Standard — grapple and sweeper family | Verify — light cleanup class |
| 4-in-1 combination buckets | Not applicable to dig end | Order-only — verify coupler and hydraulics | Verify — likely order-only |
The B877F rack: digging-led versatility
The B877F attachments story — the SDLG backhoe attachments family — is the dig end: buckets in the widths the trench schedule demands, breakers matched per the manual, augers for the fence-and-pole work that fills a utility contractor's quiet weeks. The loader end adds forks and light grapples where the yard work justifies them. The utility application context is worked in the B877F municipal-work guide, and the machine-choice context in the backhoe-versus-track-loader selection guide — the rack and the machine are chosen together, never separately.
The track-loader racks: flow decides the family
For compact track loader attachments Kenya buyers, the rack splits by hydraulic provision. The TV1100H's high-flow configuration carries the powered-tool family — augers, trenchers, sweepers and their siblings — with each tool's flow and pressure confirmed per the datasheet gate; the sibling comparison works which rack fits which site. The STR1000H's auxiliary circuit serves the lightest tools in the family — the orchard, estate and tight-access work its guide describes. Both machines' rated-capacity figures stay gated: the TV1100H attachments and STR1000H attachments conversations quote verified configurations only, and any tool that would push a load-chart limit is refused at the desk, not fitted at the site.
Five checks before the rack is quoted
- The tool list from the diary: the year's actual attachment work — the rack sized to the diary, not the catalogue.
- The matrix status marks: Standard, Order-only and Verify assigned per tool before the quotation conversation.
- The datasheet gate: flow, pressure, weight and mount verified per tool per unit — no figure from memory.
- The conflict discipline: no load claims for either track loader until the register clears; the rack is chosen by task, not by capacity rumour.
- The single quotation: machine, rack and delivery itemised together — within 24 hours, dated, authoritative.
Working the rack with the desk
When the buy SDLG attachments Kenya conversation matures, the matrix travels with it: the desk converts each row into a quoted line — tool, configuration, status — and the handover covers the quick coupler compact equipment checks that keep changeovers safe: carrier-off, tool seated, locks engaged, hydraulics connected clean. These are the SDLG hydraulic attachments Kenya fleets actually run — sized from the diary, gated by the datasheet, and quoted once, in writing.
Frequently asked questions
1. What attachments fit the SDLG B877F?
Buckets, breakers and augers on the dig end, with forks and light grapples on the loader end — each row of the matrix confirmed per the official datasheet at quotation.
2. What attachments fit the TV1100H?
The wide quick-attach family — buckets, forks, grapples, augers, trenchers and sweepers on the high-flow configuration, with flow, pressure and weight verified per tool.
3. What attachments fit the STR1000H?
The lightest tools of the family on its auxiliary circuit — light buckets, forks, augers and cleanup attachments, each verified against the datasheet gate.
4. Why are there no capacity figures in the matrix?
Both track loaders carry registered capacity conflicts in our sources; the campaign publishes no figure until the official datasheet gate clears — the matrix works by task, not by contested numbers.
5. What do the status marks mean?
Standard ships with the machine; Order-only adds the factory lead time; Verify means the datasheet check comes before quotation.
6. How do I confirm hydraulic compatibility?
Per tool, per unit: flow, pressure and coupling confirmed against the official datasheet — quoted in writing, never assumed.
7. Can I finance attachments with the machine?
Often yes — the attachments-and-parts financing guide works the lender route; the desk confirms what the file supports.
8. Who builds the rack with me?
The SDLG desk at +254 718 686 967 — tool list reviewed, matrix quoted in writing within 24 hours.
Build your attachment rack with the SDLG desk
Send your tool list — we verify every row against the datasheet, mark the status and price the rack in writing within 24 hours.
Disclaimer: Attachment compatibility — mount, flow, pressure and weight — is verified per tool and per unit against the official configuration datasheet; the matrix is a planning tool, not a specification. Registered capacity conflicts on the TV1100H and STR1000H keep all load figures gated; no such figure is published here. Figures verified 2026-11-03.
