An excavator's purchase price buys the platform; its attachments buy the work — and the fleet that treats attachments as an afterthought owns a fleet of machines that each do one job, while the fleet that plans them owns machines that do all of them. This guide covers SDLG excavator attachments Kenya buyers actually specify — buckets, hydraulic breakers excavator duty, auger attachment excavator work and quick coupler excavator Kenya programmes — with the verified compatibility, hydraulic requirements, weights and safety checks each family demands, and the dealer-supplied evidence the desk puts behind every quotation.

Quick answers if you are specifying now: the attachment follows the machine's serial, the hydraulics gate what the circuit can power, and the safety checks are the difference between a tool that earns and a tool that injures. Machine-specific matching is worked in the E6375H attachments planning guide, the breaker side in the E6700HB breaker matching guide and the range context in the excavator sizes explained guide; the desk at +254 718 686 967 verifies every combination against the serial.

Buckets: the family's first language

The discipline of excavator buckets Kenya programmes starts where every digging programme starts: the ground. The families — general-purpose for soil and mixed digging, rock construction for blasted faces and abrasion, trench widths matched to the specification — and the rows that decide: capacity against the carrier's envelope, the wear package against the material's honesty, and the fill behaviour in the site's actual product. The details that separate a good bucket from a cheap one are not visible in the quotation: the shell's weld quality, the edge package's rotation life, the pins' fit at the coupler. The desk supplies from stock and confirms fit against the serial — the bucket is the attachment the machine spends most of its life wearing, and it deserves the first hour of the specification conversation.

Hydraulic breakers: the rock argument

The breaker family is covered fully in the breaker matching guide — weight against the carrier, flow and pressure against the circuit, tool against the rock — and the range-wide rule is the same at every size: the breaker is a system, not an accessory, and the matching is verified at the serial before it is quoted. For fleets running breaking across several machines, the desk consolidates the tool set so the tools travel between carriers where the envelopes honestly overlap — one verified set earning across the fleet instead of a drawer of mismatched compromises.

Augers: the drilling discipline

The auger attachment excavator family serves the utility and foundation rows — pole holes, fence lines, drainage and small-diameter drilling where a drill rig is a machine too far. The matching rows run tighter than the bucket's: torque demand against the drive's delivery at the carrier's hydraulic spec, diameter against the machine's capacity to hold the reaction, depth against the extension and extraction plan, and the spoil discipline that keeps the hole clean and the operator informed. Augers punish mismatch quietly — a drive underfed by the circuit bores slowly and heats the oil, while an over-large diameter twists the carrier where it stands. The desk matches drive, diameter and carrier in one verification, with the extensions and spoil handling specified alongside.

Quick couplers: the multiplier with a safety contract

The quick coupler excavator Kenya question is the economics of flexibility: buckets to breaker to auger and back in minutes, multi-tool days from one machine, utilisation that a pinned-only fleet cannot reach. And it is a safety contract: locking and safety devices fitted and verified at every pre-use check, operators trained on the specific coupler type, pins and bosses kept in specification, and recalibration after any impact or panel work — the discipline the E6375H attachments guide preaches for the heavy class and this page applies across the range. A coupler without its safety discipline is the most dangerous attachment on the site; with it, the most productive.

Compatibility, hydraulics, weight and safety checks

The four gates every attachment compatibility SDLG question must clear:

1. Serial compatibility: pin diameters, pin centres and the mounting interface verified against the machine's documentation — model names are not specifications.
2. The auxiliary hydraulics requirements — flow and pressure for breakers and drives measured against the circuit's honest delivery at working speed — the nameplate lies; the working ports tell the truth.
3. Weight: the attachment's operating weight within the carrier's envelope for the work — the excavator attachment weight limits question that protects both machine and warranty.
4. The attachment safety checks — locking devices verified, pins within wear limits, hoses routed and guarded, and the operator's pre-use rows signed — the gate that opens first and closes last.

Misuse patterns that cost attachment programmes

• Model-name matching: compatibility assumed from the badge — the serial, not the name, is the specification.
• Hydraulic hopeful thinking: flow and pressure unmeasured until the tool runs slow and hot.
• Weight amnesia: the oversize attachment riding the carrier's envelope into the warranty conversation.
• The coupler monument: flexibility fitted and never used because the compatible tools were never ordered.
• Checks skipped: the pre-use rows treated as ceremony — until the day they were the load-bearing step.

Five checks before any attachment is ordered

1. The serial is on the enquiry: compatibility verified against the machine's documentation.
2. The hydraulics are measured: flow and pressure at working ports for every powered tool.
3. The weight is checked: attachment operating weight inside the carrier's envelope.
4. The safety devices are specified: coupler locking, pins within limits, hoses guarded.
5. The evidence is attached: dealer-supplied documentation and stock confirmation riding with the quotation.

Working the knowledge with the desk

Send the fleet list and the work list to +254 718 686 967 and the desk returns the attachment programme — buckets, breakers, augers and couplers specified per machine, verified against the serials, with the yard's dealer-supplied stock confirmed and order-only lines lead-timed. Across the SDLG excavator attachments Kenya range, the discipline is one sentence long: the attachment follows the machine, the hydraulics gate the tool, and the safety checks gate everything — and the desk's file of verified combinations is the cheapest engineering a fleet ever buys.

Free Download · 14-Slide Presentation

SDLG Heavy Equipment Kenya: 2026 Company & Product Overview (Download the Full Presentation)

Explore the complete SDLG heavy equipment range for Kenya in one professional 14-slide presentation. Compiled by Trust Partners Geo-Group Ltd — the authorized SDLG dealer — this downloadable overview maps every machine family sold and supported locally, from 2.6-tonne compact excavators to the 95-tonne mining flagship and the 10-tonne wheel loader range, together with warranty terms, delivery lead times, financing options and the full sales, hire, parts and contracting support available from the Ruai, Nairobi yard.

What is inside the SDLG product overview presentation

• Crawler excavators — compact 2.6–3.6 t machines, mid-range 13.5–25.5 t workhorses, 30.5–50 t quarry excavators and 65–95 t mining flagships, with long-reach and amphibious specials
• Wheel loaders — the full 1–10 t payload line from compact farm loaders to the L9100H flagship, with quick couplers, pallet forks, grapples and 4-in-1 buckets
• Electric and hybrid machines — battery-electric excavators and loaders for urban, indoor and low-noise applications
• Road machinery — G9138H to G9300H motor graders, the D18H crawler dozer and the B877F backhoe loader
• Compaction equipment — 10–26 t single-drum soil compactors, 3–12 t tandem rollers and the 30 t RP6300 pneumatic roller for sealing work
• Compact track loaders — the STR1000H and TV1100H with dozens of quick-attach tools
• Ownership and support — the 1 year / 2,000 hours factory warranty, about two weeks delivery on stock machines and 8–12 weeks on factory orders, plus parts, service and 24/7 dispatch

Document	Company & Product Overview — Trust Partners Geo-Group × SDLG
Format	PowerPoint (.pptx), 14 slides, landscape
Coverage	40+ SDLG models across eight equipment families, Kenya specifications and applications
Prepared by	Trust Partners Geo-Group Ltd — Authorized SDLG Dealer, Kenya
Price	Free — no registration required

Download the SDLG 2026 Product Overview presentation (PowerPoint)

Prefer to talk through the range first? Call or WhatsApp the SDLG desk on +254 718 686 967 — a written quotation follows within 24 hours. Specifications in the presentation are indicative and subject to the official configuration datasheet for each machine.

Frequently asked questions

Disclaimer: Model-specific attachment figures live on each machine's protected page and in official documentation; this range guide owns the matching method only, and invents no weight, flow or capacity. Attachments are quoted against the machine serial with dealer-supplied stock confirmed in writing. Figures verified 2026-11-03.