SDLG E690F Small Excavator Kenya: Specs, Price and Stock Guide
The SDLG E690F is the machine Kenyan contractors reach for when a mini excavator runs out of reach and a 13-tonne machine cannot get through the gate. Sitting in the 9-tonne class, it digs deeper, lifts more and loads faster than the 6-tonne compact units — while still trailing behind a standard pickup-class low-bed through a residential plot gate. This guide covers the E690F's verified-class specifications, what drives its price in Kenya, how to check real stock, and the warranty, finance and delivery terms buyers should expect from an authorized dealer.
Quick answers if you are comparing listings: buyers searching SDLG E690F Kenya or SDLG E690F for sale Kenya will find it is sold through the authorized SDLG excavator dealer Kenya channel with a written quotation — the E690F price Kenya buyers receive reflects configuration, VAT treatment, delivery and commissioning. The E690F specs are class ranges verified against the official datasheet; the SDLG E690F stock Kenya position changes weekly, so call for today's units; and E690F financing Kenya is available through asset-finance lenders. Buyers comparing small excavator price Kenya listings should note the E690F sits a class above the 6-tonne machines — for an E690F excavator for sale against the smaller alternative see the comparison linked below, and for a 9 tonne excavator for sale Kenya alternative the E6135H is the next step up.
| Machine class | 9-tonne class small excavator (F-series) |
| Best-fit work | Utility trenching, drainage, foundations, road maintenance, light quarry support, landscaping |
| Stock status | Yard stock rotates weekly — call or WhatsApp the SDLG desk for the current unit list; factory order available for specific configurations |
| Price basis | Written quotation only: machine configuration, bucket, VAT, delivery and commissioning stated explicitly |
| Verification date | 2026-10-27 — confirm specifications, stock and price against the official datasheet and written quotation |
Who the E690F is for
The E690F earns its keep on the jobs that dominate Kenyan mid-size earthworks: water and sewer reticulation, fibre and power trenches, culvert and drainage works, strip footings and building foundations, estate roads and farm dams. It pairs a machine that fits the SDLG excavator range between the compact E660FL and the 13-tonne E6135H — big enough to keep a 10-tonne tipper turning, small enough to work inside compounds. If you are unsure whether your work needs the 6-tonne or 9-tonne class, the published E660FL vs E690F decision guide walks through the same choice with numbers.
SDLG E690F specifications
The figures below reflect the E690F's published class data. They are configuration-dependent — bucket choice, undercarriage width and optional equipment move the numbers — so treat them as a selection guide and confirm the official datasheet for the exact unit on your quotation.
| Item | SDLG E690F (9-tonne class) |
|---|---|
| Operating weight | ≈9.2 t class, configuration-dependent |
| Engine | Yanmar diesel class (confirm exact model and output on the datasheet) |
| Standard bucket | ≈0.3–0.4 m³ class range, matched to material density |
| Max digging depth | ≈4 m class (arm/bucket configuration dependent) |
| Undercarriage | Track-mounted; adjustable track-frame options on some configurations |
| Cab | Enclosed ROPS cab with air conditioning (standard market configuration) |
| Series note | F-series machine — do not substitute H-series specification figures |
Attachments that pay for themselves
- Trenching buckets in several widths for water, sewer and fibre work — the E690F's daily bread in Kenyan towns
- Hydraulic breaker for hard pan, rock breaking and demolition prep, subject to carrier-compatibility checks
- Augers for pole holes, fence posts and tree planting
- Quick coupler where the machine changes tools several times a day across mixed sites
Every attachment must be checked against the carrier's hydraulic flow, pressure and weight limits before supply — the dealer confirms this in writing with the quotation.
Stock: what "in stock" actually means
Excavator stock at an authorized dealer moves in three states, and honest dealers say which one applies:
- In yard, ready for inspection — the machine is physically at the dealer's yard; you can walk it, start it and read the nameplate before paying anything.
- In transit / at port — landed or clearing; delivery is days-to-weeks away and should carry a stated ETA.
- Factory order — built to your configuration; lead time is quoted in writing and usually runs several weeks depending on build slot and shipping.
Because yard stock rotates weekly, this guide deliberately does not print a stock list that could be stale tomorrow. For today's E690F availability, use the contact page or WhatsApp the SDLG desk on +254 718 686 967, or start with the cost estimate calculator to frame your budget before you call.
Price basis: what drives the quotation
No responsible dealer publishes a single "list price" for a machine that changes with exchange rates, shipping and configuration — and we will not invent one here. What we can publish is exactly what drives the number on your written quotation:
- Base machine and configuration — cab spec, undercarriage options, track type
- Bucket and attachments — a trenching package and a breaker add differently to the invoice
- VAT treatment — whether the quoted figure is inclusive or exclusive of 16% VAT, stated explicitly
- Delivery — Nairobi yard collection versus county delivery, with offloading and site placement
- Commissioning — pre-delivery inspection, fluids, first-service scheduling and operator orientation
- Warranty — the dealer and factory warranty terms in writing, with what voids them stated plainly
Compare quotes line-by-line, not headline-to-headline — a cheaper machine that excludes VAT, delivery and commissioning is rarely cheaper. For how to fund the purchase, the asset finance guide, the deposit guide and the finance documents checklist cover the process end to end.
Delivery, commissioning and after-sales support
A new E690F should arrive with a documented pre-delivery inspection, operator handover, warranty registration and a first-service plan. As the authorized dealer, Trust Partners Geo-Group backs the machine with genuine parts supply and workshop support — the same support network that covers the wider SDLG equipment range, from wheel loaders to compaction rollers. Confirm the service intervals and parts availability for your county when you request the quotation — support geography matters as much as the machine.
E690F vs the alternatives in the SDLG line-up
- Against the E660FL (6-tonne): the E690F digs deeper, cycles faster on 10-tonne trucks and carries a breaker more comfortably — but costs more to buy, fuel and move. Tight-access utility work in estates may still favour the smaller machine.
- Against the E6135H (13-tonne): the E690F wins on mobilisation cost, site access and hourly running cost; the 13-tonne wins on raw production for bulk earthworks.
- Against hiring: at sustained utilisation — roughly six months of steady work in a year — ownership typically beats hire rates; the financing hub explains the break-even logic.
What a working day looks like on a Kenyan site
Numbers on a datasheet only mean something in context. Here is how the E690F typically spends a day across three common Kenyan jobs — figures are illustrative planning values, not guaranteed outputs:
| Application | Typical E690F workflow | What buyers should verify |
|---|---|---|
| Water or sewer reticulation (urban) | Opens 1.5–2.5 m trenches between existing services, spoils beside the trench, backfills and levels reinstatement | Digging depth against the mains' design depth; bucket widths available for the pipe diameter |
| Strip footings and foundations | Strips topsoil, digs footing trenches to formation, loads spoil to 10 t tippers for disposal | Trench-safety method (battering, benching or boxes) and truck access for spoil removal |
| Road drainage and culverts | Opens side drains, beds culverts, spreads bedding material and reinstates shoulders | Breaker compatibility for hard pan and weathered rock in cuttings |
The pattern across all three: the machine earns money when it keeps one 10-tonne tipper turning and changes tools without drama. That is exactly the workload the 9-tonne class is built around — and exactly where a mini excavator would run out of depth and a 13-tonne machine would run out of access.
Financing an E690F: the honest structure
Rather than invent rates, here is how a lender builds the repayment on a machine like the E690F, so you can audit any offer you receive:
- Machine price on the proforma — the base figure from your written quotation, including agreed attachments
- Less your deposit — commonly 10–30% for established buyers, potentially higher for start-ups; see the deposit scenarios guide
- Plus lender charges — arrangement fees, insurance and any premium financing, all disclosed in the offer letter
- Repaid over the tenor — 36 to 84 months changes the monthly figure and the total interest materially; the tenor guide works a like-for-like comparison
Ask every lender for the total repayment figure, not just the monthly instalment — that single number exposes the real cost of a longer tenor. The total cost of credit guide shows how reducing balance, fees and insurance interact in Kenyan equipment loans.
Before you buy: a ten-point inspection checklist
Whether the machine is yard stock or a used trade-in, walk it with this list — and photograph everything:
- Nameplate data versus the quotation's stated configuration
- Hour meter reading and any obvious tampering signs
- Undercarriage: track chain wear, sprockets, rollers, track tension
- Boom, stick and bucket pins for play and greasing history
- Hydraulic cylinders: scoring, leaks at seals
- Hoses and fittings: chafing, weeping, repairs
- Engine compartment: fluid condition, leak traces, belt wear
- Electrics: lights, beacon, instrument warnings at start-up
- Aircon and cab controls (comfort is productivity in Kenyan heat)
- Cold start and warm running, all functions through full travel
For a new machine, the dealer performs this as a documented pre-delivery inspection — ask for the signed copy with your delivery note.
Frequently asked questions
1. What does the SDLG E690F cost in Kenya?
There is no single list price: the quotation depends on configuration, bucket, VAT treatment, delivery and commissioning. Request a written quotation from the SDLG desk — it states every inclusion line by line so you can compare honestly against competing offers.
2. Is the E690F in stock in Kenya right now?
Stock rotates weekly between yard units, machines in transit and factory orders. Rather than print a list that could be stale, we ask buyers to call or WhatsApp +254 718 686 967 for today's availability — and to inspect the actual unit before committing.
3. What are the E690F's key specifications?
It is a 9-tonne-class machine at roughly 9.2 tonnes operating weight, with a Yanmar diesel, a 0.3–0.4 m³-class bucket range and around 4 metres of digging-depth class. Exact figures are configuration-dependent — confirm the official datasheet for the unit you are quoted.
4. Can the E690F run a hydraulic breaker?
Yes, subject to carrier-compatibility checks on flow, pressure and weight. The dealer verifies the pairing in writing with the quotation, and commissioning should include a trial run with the breaker fitted.
5. What warranty comes with a new E690F?
Dealer and factory warranty terms apply and are issued in writing with the quotation and delivery documents. Ask specifically what voids the warranty — incorrect breaker sizing, missed services and non-genuine filters are the usual culprits.
6. Can I finance an E690F purchase?
Yes — asset finance is available through lender partners subject to assessment. Typical requirements include ID, KRA PIN, bank statements and a written proforma invoice; the documents checklist lists everything to prepare.
7. Is the E690F better than the E660FL for trenching work?
For deeper mains and bigger trenches, yes — more depth, more bucket options, faster cycles. For narrow estate trenches and tight plots, the E660FL's smaller footprint may still win. The published 6-tonne vs 9-tonne guide compares both honestly.
8. How is the E690F delivered to my site?
On a suitable low-bed with proper loading, securing and offloading, either collected from the Nairobi yard or delivered to your county by arrangement. Site access — gate widths, ground bearing and turning room — should be confirmed before delivery day.
Check today's E690F stock and get a written quotation
Tell us your application and county — we will confirm current stock, quote the exact configuration with its datasheet, and line up delivery, commissioning and finance support.
Disclaimer: Specifications shown are configuration-dependent class figures verified 2026-10-27 and are selection guidance, not a firm offer. Stock, price and finance terms change; the written quotation and official datasheet are the only authoritative sources. Trust Partners Geo-Group Ltd introduces buyers to lenders; credit decisions rest with the lenders.
SDLG E690F Small Excavator Kenya: Specs, Price and Stock Guide
The SDLG E690F is the machine Kenyan contractors reach for when a mini excavator runs out of reach and a 13-tonne machine cannot get through the gate. Sitting in the 9-tonne class, it digs deeper, lifts more and loads faster than the 6-tonne compact units — while still trailing behind a standard pickup-class low-bed through a residential plot gate. This guide covers the E690F's verified-class specifications, what drives its price in Kenya, how to check real stock, and the warranty, finance and delivery terms buyers should expect from an authorized dealer.
Quick answers if you are comparing listings: buyers searching SDLG E690F Kenya or SDLG E690F for sale Kenya will find it is sold through the authorized SDLG excavator dealer Kenya channel with a written quotation — the E690F price Kenya buyers receive reflects configuration, VAT treatment, delivery and commissioning. The E690F specs are class ranges verified against the official datasheet; the SDLG E690F stock Kenya position changes weekly, so call for today's units; and E690F financing Kenya is available through asset-finance lenders. Buyers comparing small excavator price Kenya listings should note the E690F sits a class above the 6-tonne machines — for an E690F excavator for sale against the smaller alternative see the comparison linked below, and for a 9 tonne excavator for sale Kenya alternative the E6135H is the next step up.
| Machine class | 9-tonne class small excavator (F-series) |
| Best-fit work | Utility trenching, drainage, foundations, road maintenance, light quarry support, landscaping |
| Stock status | Yard stock rotates weekly — call or WhatsApp the SDLG desk for the current unit list; factory order available for specific configurations |
| Price basis | Written quotation only: machine configuration, bucket, VAT, delivery and commissioning stated explicitly |
| Verification date | 2026-10-27 — confirm specifications, stock and price against the official datasheet and written quotation |
Who the E690F is for
The E690F earns its keep on the jobs that dominate Kenyan mid-size earthworks: water and sewer reticulation, fibre and power trenches, culvert and drainage works, strip footings and building foundations, estate roads and farm dams. It pairs a machine that fits the SDLG excavator range between the compact E660FL and the 13-tonne E6135H — big enough to keep a 10-tonne tipper turning, small enough to work inside compounds. If you are unsure whether your work needs the 6-tonne or 9-tonne class, the published E660FL vs E690F decision guide walks through the same choice with numbers.
SDLG E690F specifications
The figures below reflect the E690F's published class data. They are configuration-dependent — bucket choice, undercarriage width and optional equipment move the numbers — so treat them as a selection guide and confirm the official datasheet for the exact unit on your quotation.
| Item | SDLG E690F (9-tonne class) |
|---|---|
| Operating weight | ≈9.2 t class, configuration-dependent |
| Engine | Yanmar diesel class (confirm exact model and output on the datasheet) |
| Standard bucket | ≈0.3–0.4 m³ class range, matched to material density |
| Max digging depth | ≈4 m class (arm/bucket configuration dependent) |
| Undercarriage | Track-mounted; adjustable track-frame options on some configurations |
| Cab | Enclosed ROPS cab with air conditioning (standard market configuration) |
| Series note | F-series machine — do not substitute H-series specification figures |
Attachments that pay for themselves
- Trenching buckets in several widths for water, sewer and fibre work — the E690F's daily bread in Kenyan towns
- Hydraulic breaker for hard pan, rock breaking and demolition prep, subject to carrier-compatibility checks
- Augers for pole holes, fence posts and tree planting
- Quick coupler where the machine changes tools several times a day across mixed sites
Every attachment must be checked against the carrier's hydraulic flow, pressure and weight limits before supply — the dealer confirms this in writing with the quotation.
Stock: what "in stock" actually means
Excavator stock at an authorized dealer moves in three states, and honest dealers say which one applies:
- In yard, ready for inspection — the machine is physically at the dealer's yard; you can walk it, start it and read the nameplate before paying anything.
- In transit / at port — landed or clearing; delivery is days-to-weeks away and should carry a stated ETA.
- Factory order — built to your configuration; lead time is quoted in writing and usually runs several weeks depending on build slot and shipping.
Because yard stock rotates weekly, this guide deliberately does not print a stock list that could be stale tomorrow. For today's E690F availability, use the contact page or WhatsApp the SDLG desk on +254 718 686 967, or start with the cost estimate calculator to frame your budget before you call.
Price basis: what drives the quotation
No responsible dealer publishes a single "list price" for a machine that changes with exchange rates, shipping and configuration — and we will not invent one here. What we can publish is exactly what drives the number on your written quotation:
- Base machine and configuration — cab spec, undercarriage options, track type
- Bucket and attachments — a trenching package and a breaker add differently to the invoice
- VAT treatment — whether the quoted figure is inclusive or exclusive of 16% VAT, stated explicitly
- Delivery — Nairobi yard collection versus county delivery, with offloading and site placement
- Commissioning — pre-delivery inspection, fluids, first-service scheduling and operator orientation
- Warranty — the dealer and factory warranty terms in writing, with what voids them stated plainly
Compare quotes line-by-line, not headline-to-headline — a cheaper machine that excludes VAT, delivery and commissioning is rarely cheaper. For how to fund the purchase, the asset finance guide, the deposit guide and the finance documents checklist cover the process end to end.
Delivery, commissioning and after-sales support
A new E690F should arrive with a documented pre-delivery inspection, operator handover, warranty registration and a first-service plan. As the authorized dealer, Trust Partners Geo-Group backs the machine with genuine parts supply and workshop support — the same support network that covers the wider SDLG equipment range, from wheel loaders to compaction rollers. Confirm the service intervals and parts availability for your county when you request the quotation — support geography matters as much as the machine.
E690F vs the alternatives in the SDLG line-up
- Against the E660FL (6-tonne): the E690F digs deeper, cycles faster on 10-tonne trucks and carries a breaker more comfortably — but costs more to buy, fuel and move. Tight-access utility work in estates may still favour the smaller machine.
- Against the E6135H (13-tonne): the E690F wins on mobilisation cost, site access and hourly running cost; the 13-tonne wins on raw production for bulk earthworks.
- Against hiring: at sustained utilisation — roughly six months of steady work in a year — ownership typically beats hire rates; the financing hub explains the break-even logic.
What a working day looks like on a Kenyan site
Numbers on a datasheet only mean something in context. Here is how the E690F typically spends a day across three common Kenyan jobs — figures are illustrative planning values, not guaranteed outputs:
| Application | Typical E690F workflow | What buyers should verify |
|---|---|---|
| Water or sewer reticulation (urban) | Opens 1.5–2.5 m trenches between existing services, spoils beside the trench, backfills and levels reinstatement | Digging depth against the mains' design depth; bucket widths available for the pipe diameter |
| Strip footings and foundations | Strips topsoil, digs footing trenches to formation, loads spoil to 10 t tippers for disposal | Trench-safety method (battering, benching or boxes) and truck access for spoil removal |
| Road drainage and culverts | Opens side drains, beds culverts, spreads bedding material and reinstates shoulders | Breaker compatibility for hard pan and weathered rock in cuttings |
The pattern across all three: the machine earns money when it keeps one 10-tonne tipper turning and changes tools without drama. That is exactly the workload the 9-tonne class is built around — and exactly where a mini excavator would run out of depth and a 13-tonne machine would run out of access.
Financing an E690F: the honest structure
Rather than invent rates, here is how a lender builds the repayment on a machine like the E690F, so you can audit any offer you receive:
- Machine price on the proforma — the base figure from your written quotation, including agreed attachments
- Less your deposit — commonly 10–30% for established buyers, potentially higher for start-ups; see the deposit scenarios guide
- Plus lender charges — arrangement fees, insurance and any premium financing, all disclosed in the offer letter
- Repaid over the tenor — 36 to 84 months changes the monthly figure and the total interest materially; the tenor guide works a like-for-like comparison
Ask every lender for the total repayment figure, not just the monthly instalment — that single number exposes the real cost of a longer tenor. The total cost of credit guide shows how reducing balance, fees and insurance interact in Kenyan equipment loans.
Before you buy: a ten-point inspection checklist
Whether the machine is yard stock or a used trade-in, walk it with this list — and photograph everything:
- Nameplate data versus the quotation's stated configuration
- Hour meter reading and any obvious tampering signs
- Undercarriage: track chain wear, sprockets, rollers, track tension
- Boom, stick and bucket pins for play and greasing history
- Hydraulic cylinders: scoring, leaks at seals
- Hoses and fittings: chafing, weeping, repairs
- Engine compartment: fluid condition, leak traces, belt wear
- Electrics: lights, beacon, instrument warnings at start-up
- Aircon and cab controls (comfort is productivity in Kenyan heat)
- Cold start and warm running, all functions through full travel
For a new machine, the dealer performs this as a documented pre-delivery inspection — ask for the signed copy with your delivery note.
Frequently asked questions
1. What does the SDLG E690F cost in Kenya?
There is no single list price: the quotation depends on configuration, bucket, VAT treatment, delivery and commissioning. Request a written quotation from the SDLG desk — it states every inclusion line by line so you can compare honestly against competing offers.
2. Is the E690F in stock in Kenya right now?
Stock rotates weekly between yard units, machines in transit and factory orders. Rather than print a list that could be stale, we ask buyers to call or WhatsApp +254 718 686 967 for today's availability — and to inspect the actual unit before committing.
3. What are the E690F's key specifications?
It is a 9-tonne-class machine at roughly 9.2 tonnes operating weight, with a Yanmar diesel, a 0.3–0.4 m³-class bucket range and around 4 metres of digging-depth class. Exact figures are configuration-dependent — confirm the official datasheet for the unit you are quoted.
4. Can the E690F run a hydraulic breaker?
Yes, subject to carrier-compatibility checks on flow, pressure and weight. The dealer verifies the pairing in writing with the quotation, and commissioning should include a trial run with the breaker fitted.
5. What warranty comes with a new E690F?
Dealer and factory warranty terms apply and are issued in writing with the quotation and delivery documents. Ask specifically what voids the warranty — incorrect breaker sizing, missed services and non-genuine filters are the usual culprits.
6. Can I finance an E690F purchase?
Yes — asset finance is available through lender partners subject to assessment. Typical requirements include ID, KRA PIN, bank statements and a written proforma invoice; the documents checklist lists everything to prepare.
7. Is the E690F better than the E660FL for trenching work?
For deeper mains and bigger trenches, yes — more depth, more bucket options, faster cycles. For narrow estate trenches and tight plots, the E660FL's smaller footprint may still win. The published 6-tonne vs 9-tonne guide compares both honestly.
8. How is the E690F delivered to my site?
On a suitable low-bed with proper loading, securing and offloading, either collected from the Nairobi yard or delivered to your county by arrangement. Site access — gate widths, ground bearing and turning room — should be confirmed before delivery day.
Check today's E690F stock and get a written quotation
Tell us your application and county — we will confirm current stock, quote the exact configuration with its datasheet, and line up delivery, commissioning and finance support.
Disclaimer: Specifications shown are configuration-dependent class figures verified 2026-10-27 and are selection guidance, not a firm offer. Stock, price and finance terms change; the written quotation and official datasheet are the only authoritative sources. Trust Partners Geo-Group Ltd introduces buyers to lenders; credit decisions rest with the lenders.
